P.M. ‘A’
This
inspection is performed every 100-150 hours of operation and includes the
following:
·
Check all electrical components and
clean contacts.
·
Lubricate the chassis and mast
assembly.
·
Check wheel lug nuts where applicable.
·
Visually inspect battery, cables and
connectors.
·
Check all fluid levels.
·
Visual inspection and basic function
tests of the various components, systems and attachments are performed.
·
A written recommendation is made for
any repairs required.
·
Approximate time: 1.25 hours
P.M. ‘B’
This
inspection is performed every second or third service interval and includes the
following:
·
All of the above PM ‘A‘ operations.
·
The battery cell condition and cell
levels are thoroughly inspected and tested. Electrolyte levels adjusted as
required.
·
Visual, operational and physical
inspections of the other major components and systems are performed. Fluid
levels adjusted as required.
·
A written recommendation is made for any
repairs required.
·
Approximate time: 2 hours
P.M. ‘C’
This
inspection is performed every 1200 to 2000 hours of operation or at least once
per year and includes the following:
·
All of the above PM ‘A‘ and ‘B‘
operations.
·
Replace other fluids and hydraulic oil
filters.
·
Repack the wheel bearings.
·
The braking, steering, hydraulic,
electrical, battery and charging systems are serviced and parts are replaced as
required.
·
A detailed evaluation of the overall
condition of the forklift, including the lifting device (mast and components)
is provided.
·
Inspection and recalibration of the
charger is scheduled and performed by a qualified technician.
·
A written recommendation is made and
authority obtained (based on your internal procedures) for any repairs
required.
·
Approximate time: 8 hours – Liftway
shop
INSPECTION OF
LIFTING DEVICES
Inspection
is required by the Department of Labour and must be performed at least once
every 12 months.
· Upon successful
completion of the inspection and any necessary repairs, Liftway will provide a
completed and signed ‘Certificate of Inspection’ for your files and a dated
certificate will also be affixed to the upright.
· This inspection can be
done independently of other services but is more cost effective when performed
in conjunction with the PM ‘C’ service.
· Time approximate: 1.5
hours
Return to Service
Return to Homepage